Lö hybrid generators

HYBGEN 32

A World-Record range extender for hybrid drones

The 32 HYBGEN is an electric generator that can be installed into a multirotor drone to extend the flight time. This hybrid powertrain is ideal for drones up to 25 kg MTOW that require long flight times or heavy payloads. It consists of a lightweight two-stroke combustion engine of 32cc with a powerful permanent-magnet generator attached to the crankshaft.

The best power / weight ratio in the market

Based on the generator from the leading hybrid UAV company Quaternium, with thousands of hours of flight time, this standalone range extender has top-notch quality and reliability features.

The HYBGEN generator weighs only 3.7 kg, and produces a maximum power output of 2400 W. Its internal combustion engine consumes petrol and spins a generator ensuring 48V output. With the HYBGEN, flight time can be multiplied by 6 compared to a battery-only setup.

Thousands of hours of flight experience

Based on the generator from the leading hybrid UAV company Quaternium, with thousands of hours of flight time, this standalone range extender of 32 cc has unparalleled reliability.

Make the most of your UAV with an efficient and powerful upgrade that will allow you to fly for up to 5 hours at only 25 kg MTOW. 32 HYBGEN has top-notch quality features that make it easy to integrate and safer to operate.

The most reliable hybrid power system

The generator chosen by the leading hybrid UAV companies

Lö EFI integrated

No need to adjust the carburetor, Lö EFI automatically compensates when high altitude is reached.

Safety redundancy

Power redundancy with electric battery for a safe landing in case of an engine critical failure.

Easy installation

Standalone solution with PDB / governor board for easy mount and installation in any multirotor UAV.

HYBGEN 32 SPECS

Applicable aircraft	multirotor
UAS max. take off weight	25 kg
Engine type	two-stroke
Displacement	32 cc
Weight	3,7 kg
Max. electric output (continuous)	2400 W (12,500 RPM)
Output voltage	49 V
Amps max	50 A
Fuel consumption	1 – 3 l /hr
Fuel injection	electronic
Data protocol	mavlink / SBUS / CPPM
Supply voltage	12 S
Cooling method	forced – air cooling
Altitude	3,000 asml *
Working temperature	-10 to 45 ºC

* Options for enhanced altitude available upon request.